# Any experience with running mender on a stripped down linux based PLC

**URL:** <https://hub.mender.io/t/any-experience-with-running-mender-on-a-stripped-down-linux-based-plc/4079>\
**Category:** Other\
**Tags:** arm, plc\
**Created:** [September 14, 2021, 2:49pm UTC](https://hub.mender.io/t/any-experience-with-running-mender-on-a-stripped-down-linux-based-plc/4079 "2021-09-14T14:49:47Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![uishon](https://yyz2.discourse-cdn.com/flex036/user_avatar/hub.mender.io/uishon/32/1326_2.png) [@uishon](https://hub.mender.io/u/uishon)\
**Post date:** [September 14, 2021, 2:49pm UTC](https://hub.mender.io/t/any-experience-with-running-mender-on-a-stripped-down-linux-based-plc/4079/1 "2021-09-14T14:49:47Z")

</div>

Our PLC is running Linux (3.14.79-rt85, created with OSELAS.Toolchain) on a 800 MHz ARM® CPU Cortex™- A9 single Core. Any experience?

---

<div class="post-metadata">

**Author:** ![MarekBelisko](https://yyz2.discourse-cdn.com/flex036/user_avatar/hub.mender.io/marekbelisko/32/33_2.png) [@MarekBelisko](https://hub.mender.io/u/MarekBelisko)\
**Post date:** [September 14, 2021, 7:05pm UTC](https://hub.mender.io/t/any-experience-with-running-mender-on-a-stripped-down-linux-based-plc/4079/2 "2021-09-14T19:05:42Z")

</div>

Depending on bootloader you can integrate mender to any linux based system. No real experience though but it could be that PLC vendor have locked/properietary bootloader and then integration is harder/impossible.