# General Discussions **URL:** https://hub.mender.io/c/general-discussions/12.md?page=57 [Latest](https://hub.mender.io/latest.md) · [Categories](https://hub.mender.io/categories.md) · [Tags](https://hub.mender.io/tags.md) **Page:** 58 --- ## [Partition names in sdimg](https://hub.mender.io/t/partition-names-in-sdimg/2753)
**Author:** [@danie](https://hub.mender.io/u/danie)\ **Replies:** 5\ **Last updated:** [October 30, 2020, 4:00pm UTC](https://hub.mender.io/t/partition-names-in-sdimg/2753 "2020-10-30T16:00:09Z")
Hi, I’m creating SD Card images .sdimg and the partitions in sumo have clear naming as follows, # sumo ls /media/ux/ primary secondary data Now, I switched to zeus and the partition names are no longer exist, # zeus… --- ## [Cannot Accept Devices](https://hub.mender.io/t/cannot-accept-devices/2741)
**Author:** [@gphillips-a2e](https://hub.mender.io/u/gphillips-a2e)\ **Replies:** 6\ **Last updated:** [October 29, 2020, 11:28am UTC](https://hub.mender.io/t/cannot-accept-devices/2741 "2020-10-29T11:28:08Z")
I was following the get started instructions for a virtual device (https://docs.mender.io/get-started/preparation/prepare-a-virtual-device), but got an error when trying to accept the device. Do you know what is causing… --- ## [Posibility of changing name of /data partition](https://hub.mender.io/t/posibility-of-changing-name-of-data-partition/597)
**Author:** [@ajithpv](https://hub.mender.io/u/ajithpv)\ **Replies:** 2\ **Last updated:** [October 29, 2020, 5:17am UTC](https://hub.mender.io/t/posibility-of-changing-name-of-data-partition/597 "2020-10-29T05:17:51Z")
Because of some formal reasons, we would like to change the name of the /data partition to /conf. Hence, we would like to know whether this is possible? Also, what is the recommended way to change the /data partition na… --- ## [Openssl error during cross compilation](https://hub.mender.io/t/openssl-error-during-cross-compilation/2747)
**Author:** [@buffo](https://hub.mender.io/u/buffo)\ **Replies:** 1\ **Last updated:** [October 28, 2020, 2:54pm UTC](https://hub.mender.io/t/openssl-error-during-cross-compilation/2747 "2020-10-28T14:54:17Z")
Hi there, I get a go compile error while trying to cross-compiler the mender client: I am doing all processes in a golang dockerfile, that looks sth like this: Is this a problem with the a software version I am us… --- ## [Services used by mender-client](https://hub.mender.io/t/services-used-by-mender-client/2294)
**Author:** [@malveo](https://hub.mender.io/u/malveo)\ **Replies:** 16\ **Last updated:** [October 28, 2020, 2:39pm UTC](https://hub.mender.io/t/services-used-by-mender-client/2294 "2020-10-28T14:39:06Z")
Hi All, We are deploying devices with Mender within a firewalled network, and all outgoing traffic is forbidden by default. Which outbound ports must be open to allow the mender-client to reach the hosted SaaS services… --- ## [Can't use Mender-Arrtifact to create a snapshot](https://hub.mender.io/t/cant-use-mender-arrtifact-to-create-a-snapshot/2716)
**Author:** [@Kennen](https://hub.mender.io/u/Kennen)\ **Replies:** 22\ **Last updated:** [October 28, 2020, 1:40pm UTC](https://hub.mender.io/t/cant-use-mender-arrtifact-to-create-a-snapshot/2716 "2020-10-28T13:40:19Z")
I’m newbie in Mender and I’m in topic that create a snapshot using Mender-Artifact on Raspberry Pi 4 but I’m get an error like this when run Mender-Artifact command. Please help!!! Thansk for reading P/s I’m using R… --- ## [Connection issue with mender server](https://hub.mender.io/t/connection-issue-with-mender-server/2725)
**Author:** [@terryk](https://hub.mender.io/u/terryk)\ **Replies:** 7\ **Last updated:** [October 28, 2020, 1:37pm UTC](https://hub.mender.io/t/connection-issue-with-mender-server/2725 "2020-10-28T13:37:50Z")
I am using raspberry pi 4 and trying to implement OTA with mender. I have some problem on reporting status to mender. Here are some error log. – Logs begin at Fri 2020-10-23 10:22:45 HKT, end at Fri 2020-10-23 10:27:15 … --- ## [Update not working - reporting incorrect artifact name and reboot required](https://hub.mender.io/t/update-not-working-reporting-incorrect-artifact-name-and-reboot-required/2700)
**Author:** [@james-onsolution](https://hub.mender.io/u/james-onsolution)\ **Replies:** 9\ **Last updated:** [October 28, 2020, 10:13am UTC](https://hub.mender.io/t/update-not-working-reporting-incorrect-artifact-name-and-reboot-required/2700 "2020-10-28T10:13:47Z")
I have a very strange issue. I have a fleet of Raspberry Pi 3B+'s running a Yocto build. I’ve recently tried making a new build based on Zeus, and I’ve got that build working, but the updates are very unreliable and I’m … --- ## [Os update](https://hub.mender.io/t/os-update/2726)
**Author:** [@avi992](https://hub.mender.io/u/avi992)\ **Replies:** 3\ **Last updated:** [October 27, 2020, 3:47pm UTC](https://hub.mender.io/t/os-update/2726 "2020-10-27T15:47:00Z")
I am trying to update the os with raspberry pi3, I am using mender production server with self sign certificates. in the raspberrypi i have installed the mender supported operating system \[raspbian-buster-lite-mender.im… --- ## [Update not working](https://hub.mender.io/t/update-not-working/2715)
**Author:** [@martin](https://hub.mender.io/u/martin)\ **Replies:** 23\ **Last updated:** [October 27, 2020, 11:47am UTC](https://hub.mender.io/t/update-not-working/2715 "2020-10-27T11:47:45Z")
Hi, I’ve integrated mender into our board and went through the integration checklist ok but for some reason an image update isn’t working. It does the update and reboots but as soon after booting it reboots again. I ch… --- ## [Error when convert container image](https://hub.mender.io/t/error-when-convert-container-image/2622)
**Author:** [@M.Tuan](https://hub.mender.io/u/M.Tuan)\ **Replies:** 43\ **Last updated:** [October 27, 2020, 10:55am UTC](https://hub.mender.io/t/error-when-convert-container-image/2622 "2020-10-27T10:55:43Z")
Hi, Mender team I’m currently have a Mini PC at home, and I want to deploy use Mender to deploy some service (such as web server) on it, but I have some difficulties on converting Debian container image. It would be gr… --- ## [Error when run Docker-build](https://hub.mender.io/t/error-when-run-docker-build/2735)
**Author:** [@Kennen](https://hub.mender.io/u/Kennen)\ **Replies:** 5\ **Last updated:** [October 26, 2020, 7:59pm UTC](https://hub.mender.io/t/error-when-run-docker-build/2735 "2020-10-26T19:59:53Z")
Hi Mender Team ! I got this error when I run docker-build. Could any one tell me what I’m missing? Thanks a lot! --- ## [How to integrate meta-mender to RISCV](https://hub.mender.io/t/how-to-integrate-meta-mender-to-riscv/2730)
**Author:** [@surendrallam](https://hub.mender.io/u/surendrallam)\ **Replies:** 0\ **Last updated:** [October 23, 2020, 8:32am UTC](https://hub.mender.io/t/how-to-integrate-meta-mender-to-riscv/2730 "2020-10-23T08:32:19Z")
Hi, Surenda here, I am working on Mender to integrate with RISC-V board, I couldn’t found resources for my problem. So, please help me in figuring out how to integrate meta-mender to Yocto. Board Link: https://www.sifi… --- ## [REST API get list of device ID's from deployment](https://hub.mender.io/t/rest-api-get-list-of-device-ids-from-deployment/2391)
**Author:** [@MarekBelisko](https://hub.mender.io/u/MarekBelisko)\ **Replies:** 12\ **Last updated:** [October 23, 2020, 3:41pm UTC](https://hub.mender.io/t/rest-api-get-list-of-device-ids-from-deployment/2391 "2020-10-23T15:41:11Z")
Hi, I’m plying with server REST API and I’m trying to get list of devices for deployment. I first list deployments and then try to get list of ID’s per device. I’m getting this log (golang): INFO\[0001\] deployment:{2020… --- ## [Does Mendor work with secure boot on iMX 8 M mini?](https://hub.mender.io/t/does-mendor-work-with-secure-boot-on-imx-8-m-mini/2719)
**Author:** [@kishorekumarkadari](https://hub.mender.io/u/kishorekumarkadari)\ **Replies:** 1\ **Last updated:** [October 23, 2020, 2:54pm UTC](https://hub.mender.io/t/does-mendor-work-with-secure-boot-on-imx-8-m-mini/2719 "2020-10-23T14:54:17Z")
Hello everyone Could anyone throw some light on secure boot, does secure boot feature on iMX 8 M mini have any problems with Mender? Thanks Kishore Kadari --- ## [Raspberry Pi 3 with mender zeus error "u-boot-1\_2020.01-r0 do\_configure: U-Boot configuration rpi\_3\_32b\_config has setting...but Mender expects: CONFIG\_ENV\_OFFSET=0x400000"](https://hub.mender.io/t/raspberry-pi-3-with-mender-zeus-error-u-boot-1-2020-01-r0-do-configure-u-boot-configuration-rpi-3-32b-config-has-setting-but-mender-expects-config-env-offset-0x400000/2732)
**Author:** [@Ks89](https://hub.mender.io/u/Ks89)\ **Replies:** 6\ **Last updated:** [October 23, 2020, 1:10pm UTC](https://hub.mender.io/t/raspberry-pi-3-with-mender-zeus-error-u-boot-1-2020-01-r0-do-configure-u-boot-configuration-rpi-3-32b-config-has-setting-but-mender-expects-config-env-offset-0x400000/2732 "2020-10-23T13:10:28Z")
I’m trying mender with raspberry pi 3 on Zeus (latest version on zeus branch) but I’m receiving this error: ERROR: u-boot-1\_2020.01-r0 do\_configure: U-Boot configuration rpi\_3\_32b\_config has setting: CONFIG\_ENV\_OFFSET=0… --- ## [Mender demo server sudden slow and stuck](https://hub.mender.io/t/mender-demo-server-sudden-slow-and-stuck/2043)
**Author:** [@nishad1092](https://hub.mender.io/u/nishad1092)\ **Replies:** 51\ **Last updated:** [October 23, 2020, 8:28am UTC](https://hub.mender.io/t/mender-demo-server-sudden-slow-and-stuck/2043 "2020-10-23T08:28:18Z")
Hi, I have been using Mender for couple of weeks now, suddenly Mender server GUI is stuck and slow, its staggering. No errors in the logs. Could you let me know how to resolve this. Im running the server in a 2 cpus, 8… --- ## [Imx8qxpc0mek mender integration error](https://hub.mender.io/t/imx8qxpc0mek-mender-integration-error/2717)
**Author:** [@monahsilva](https://hub.mender.io/u/monahsilva)\ **Replies:** 1\ **Last updated:** [October 22, 2020, 8:55pm UTC](https://hub.mender.io/t/imx8qxpc0mek-mender-integration-error/2717 "2020-10-22T20:55:05Z")
Hello!! I’m have been integration mender with the board imx8qxp0mek and when I push on the SDcard in the board, the answer is: “U-Boot SPL 2020.04-5.4.24-2.1.0+g4979a99 (Oct 21 2020 - 20:27:17 +0000) Normal Boot WDT:… --- ## [i.MX 8MM mender integration error](https://hub.mender.io/t/i-mx-8mm-mender-integration-error/2701)
**Author:** [@danie](https://hub.mender.io/u/danie)\ **Replies:** 5\ **Last updated:** [October 22, 2020, 4:30pm UTC](https://hub.mender.io/t/i-mx-8mm-mender-integration-error/2701 "2020-10-22T16:30:13Z")
Hi, I’m integrating mender with Yocto zeus for i.MX 8mm EVK. The build completed sucessfully without any errors but when I try to boot the device I get the following error. Hit any key to stop autoboot: 0 Run CMD11 1… --- ## [Is there a support for meta-mender-imx on zeus?](https://hub.mender.io/t/is-there-a-support-for-meta-mender-imx-on-zeus/2669)
**Author:** [@bhstalel](https://hub.mender.io/u/bhstalel)\ **Replies:** 17\ **Last updated:** [October 22, 2020, 4:24pm UTC](https://hub.mender.io/t/is-there-a-support-for-meta-mender-imx-on-zeus/2669 "2020-10-22T16:24:16Z")
Hello All, I’m working on a custom board based on IMX8M Mini, before NXP released the zeus branch, I was working on sumo branch and using meta-mender-core and meta-mender-imx for IMX8 support, and all of that based on … --- ## [Excessive device authorization sets](https://hub.mender.io/t/excessive-device-authorization-sets/2697)
**Author:** [@poursteady](https://hub.mender.io/u/poursteady)\ **Replies:** 25\ **Last updated:** [October 21, 2020, 10:42pm UTC](https://hub.mender.io/t/excessive-device-authorization-sets/2697 "2020-10-21T22:42:14Z")
Some of the devices in our fleet continue to create new authorization sets even after they’ve been recently accepted (presumably with similar information). Why does this happen? Is there any way to prevent this? --- ## [Hosted Mender URL details for Mender client HTTP proxy settings](https://hub.mender.io/t/hosted-mender-url-details-for-mender-client-http-proxy-settings/2708)
**Author:** [@nowls](https://hub.mender.io/u/nowls)\ **Replies:** 1\ **Last updated:** [October 21, 2020, 9:37pm UTC](https://hub.mender.io/t/hosted-mender-url-details-for-mender-client-http-proxy-settings/2708 "2020-10-21T21:37:54Z")
Our company deploys embedded devices at customer sites that connect to the Internet through their internal networks. We use Hosted Mender to supply FOTA updates to these devices. The Mender client in our firmware is vers… --- ## [Final Checks before release](https://hub.mender.io/t/final-checks-before-release/2489)
**Author:** [@thesillywhat](https://hub.mender.io/u/thesillywhat)\ **Replies:** 14\ **Last updated:** [October 20, 2020, 3:20pm UTC](https://hub.mender.io/t/final-checks-before-release/2489 "2020-10-20T15:20:03Z")
Hello, I am trying check my understanding before deployment. how mender downloads the update. Is it done in parts or is it one single download? It looks like it is one single download. For example, If I have an upda… --- ## [iMX8M mini evk look alike](https://hub.mender.io/t/imx8m-mini-evk-look-alike/2653)
**Author:** [@dvescovi](https://hub.mender.io/u/dvescovi)\ **Replies:** 3\ **Last updated:** [October 20, 2020, 2:53pm UTC](https://hub.mender.io/t/imx8m-mini-evk-look-alike/2653 "2020-10-20T14:53:37Z")
Board description iMX8M Mini I have a a iMX8M mini eval kit and I have the mender demo working. I then tried to take the next step and integrate mender with my iMX8M mini board. The board is almost exactly the same as t… --- ## [ImportError: No module named 'zmq'](https://hub.mender.io/t/importerror-no-module-named-zmq/2682)
**Author:** [@SamanRatna](https://hub.mender.io/u/SamanRatna)\ **Replies:** 5\ **Last updated:** [October 20, 2020, 2:52pm UTC](https://hub.mender.io/t/importerror-no-module-named-zmq/2682 "2020-10-20T14:52:35Z")
Hi guys, I have a ArtifactInstall\_Enter\_01\_yes.py script as such, #!/usr/bin/python3 # Import libraries import os, pwd import zmq # draw on default display regardless where run from # script mandatory for having acce… --- ## [Mender Server 2.5.x mender-mongo\_1 not starting](https://hub.mender.io/t/mender-server-2-5-x-mender-mongo-1-not-starting/2694)
**Author:** [@martin](https://hub.mender.io/u/martin)\ **Replies:** 1\ **Last updated:** [October 20, 2020, 2:19pm UTC](https://hub.mender.io/t/mender-server-2-5-x-mender-mongo-1-not-starting/2694 "2020-10-20T14:19:51Z")
Hi, I’ve just gone through the Mender Server setup on my Ubuntu 18.06 PC but I get the following error in the mender-mongo service mender-mongo\_1 | {"t":{"$date":"2020-10-20T08:08:24.453+00:00"},"s":"… --- ## [Update Issue When /dev/sda Is Variable](https://hub.mender.io/t/update-issue-when-dev-sda-is-variable/2677)
**Author:** [@jemzp](https://hub.mender.io/u/jemzp)\ **Replies:** 10\ **Last updated:** [October 20, 2020, 11:32am UTC](https://hub.mender.io/t/update-issue-when-dev-sda-is-variable/2677 "2020-10-20T11:32:13Z")
Hi, Depending on if I have a usb inserted my hard disk can be either at /dev/sda or /dev/sdb. When making mender-convert artifacts you must specify the exact location, my update needs to work for several different USFFC… --- ## [Issues with the PICO-PI-IMX7](https://hub.mender.io/t/issues-with-the-pico-pi-imx7/2693)
**Author:** [@Bart](https://hub.mender.io/u/Bart)\ **Replies:** 7\ **Last updated:** [September 23, 2020, 1:55pm UTC](https://hub.mender.io/t/issues-with-the-pico-pi-imx7/2693 "2020-09-23T13:55:44Z")
Hi Joris, Thanks a lot for this tutorial, it helped me make my first steps in Mender and some of the Technexion/Yocto related things. I have followed all the steps but I think I have made a mistake somewhere. I am a beg… --- ## [ERROR: Get https://registry.mender.io/v2/mendersoftware/tenantadm/manifests/1.1.0: no basic auth credentials](https://hub.mender.io/t/error-get-https-registry-mender-io-v2-mendersoftware-tenantadm-manifests-1-1-0-no-basic-auth-credentials/2372)
**Author:** [@triampmeili](https://hub.mender.io/u/triampmeili)\ **Replies:** 4\ **Last updated:** [October 19, 2020, 1:32pm UTC](https://hub.mender.io/t/error-get-https-registry-mender-io-v2-mendersoftware-tenantadm-manifests-1-1-0-no-basic-auth-credentials/2372 "2020-10-19T13:32:37Z")
mender-server@test-Macmini:~/mender-server-triamp$ cd production/ mender-server@test-Macmini:~/mender-server-triamp/production$ git log --oneline 2.4.0…HEAD c18698c (HEAD -\> triamp-production) production: Enterprise co… --- ## [Mender pull request - check failed](https://hub.mender.io/t/mender-pull-request-check-failed/2686)
**Author:** [@PFGO](https://hub.mender.io/u/PFGO)\ **Replies:** 0\ **Last updated:** [October 19, 2020, 7:36am UTC](https://hub.mender.io/t/mender-pull-request-check-failed/2686 "2020-10-19T07:36:17Z")
Hello Community, I do not know where to report the problem, so I try it in the forum. I tried to create a pull request on the mendersoftware/mender repo, but the check failed - Can it be checked please? https://gitlab.c… [Previous page](https://hub.mender.io/c/general-discussions/12.md?page=56) [Next page](https://hub.mender.io/c/general-discussions/12.md?page=58)