# Yocto Project **URL:** https://hub.mender.io/c/board-integrations/yocto-project/10.md [Latest](https://hub.mender.io/latest.md) · [Categories](https://hub.mender.io/categories.md) · [Tags](https://hub.mender.io/tags.md) --- ## [\[ Topic template - Yocto Project \]](https://hub.mender.io/t/topic-template-yocto-project/217)
**Author:** [@mirzak](https://hub.mender.io/u/mirzak)\ **Replies:** 0\ **Last updated:** [February 13, 2019, 2:32pm UTC](https://hub.mender.io/t/topic-template-yocto-project/217 "2019-02-13T14:32:59Z")
Board description TODO: Short description of the board. TODO: Upload a board picture here. Vendor URL: TODO — vendor page with the board specs Wiki: TODO — wiki URL (if available) SoC / SoM: TODO — e.g. NXP i.MX8MP, Q… --- ## [Google Repo](https://hub.mender.io/t/google-repo/58)
**Author:** [@mirzak](https://hub.mender.io/u/mirzak)\ **Replies:** 2\ **Last updated:** [March 8, 2022, 10:38am UTC](https://hub.mender.io/t/google-repo/58 "2022-03-08T10:38:45Z")
To simplify fetching sources and setting up the Yocto build environment we have decided to use the Google repo tool, which allows fetching sources from multiple location in a single command based on manifest files (xml). … --- ## [About the Yocto Project category](https://hub.mender.io/t/about-the-yocto-project-category/54)
**Author:** [@eystein](https://hub.mender.io/u/eystein)\ **Replies:** 0\ **Last updated:** [September 24, 2018, 2:56pm UTC](https://hub.mender.io/t/about-the-yocto-project-category/54 "2018-09-24T14:56:49Z")
Board integrations for the Yocto Project. If you are looking for or writing about a Mender board integration that is not for the Yocto Project, please use a different category or use search. When submitting a new topic… --- ## [Mender U-Boot integration for Toradex SMARC i.MX8M Plus (Yocto Scarthgap)](https://hub.mender.io/t/mender-u-boot-integration-for-toradex-smarc-i-mx8m-plus-yocto-scarthgap/8364)
**Author:** [@aleena.v](https://hub.mender.io/u/aleena.v)\ **Replies:** 2\ **Last updated:** [September 14, 2026, 11:04am UTC](https://hub.mender.io/t/mender-u-boot-integration-for-toradex-smarc-i-mx8m-plus-yocto-scarthgap/8364 "2026-09-14T11:04:56Z")
Hi all, We’re building a PoC for A/B OTA updates using the open-source Mender client on a Toradex SMARC i.MX8M Plus module. Environment: Yocto 5.0.14 (Scarthgap), official Toradex BSP (meta-toradex-nxp) Machine: tora… --- ## [Digilent Arty Z7 (Zynq-7000)](https://hub.mender.io/t/digilent-arty-z7-zynq-7000/8324)
**Author:** [@TheYoctoJester](https://hub.mender.io/u/TheYoctoJester)\ **Replies:** 0\ **Last updated:** [July 20, 2026, 11:16am UTC](https://hub.mender.io/t/digilent-arty-z7-zynq-7000/8324 "2026-07-20T11:16:51Z")
Introduction The Digilent Arty Z7 is a popular entry into the Zynq-7000 world, but as far as current software support goes, it does not exist: there is no devicetree for it in mainline Linux or U-Boot, no machine in meta… --- ## [Arduino Uno Q - main system + Yocto](https://hub.mender.io/t/arduino-uno-q-main-system-yocto/8321)
**Author:** [@TheYoctoJester](https://hub.mender.io/u/TheYoctoJester)\ **Replies:** 0\ **Last updated:** [July 15, 2026, 9:33am UTC](https://hub.mender.io/t/arduino-uno-q-main-system-yocto/8321 "2026-07-15T09:33:32Z")
Board description The Arduino Uno Q pairs a Qualcomm Dragonwing QRB2210 running Linux with an STM32U585 microcontroller on a single board. For OTA updates this is an interesting platform: the Qualcomm boot chain ships a … --- ## [Use FIT Image with Embedded Device Tree - Patch on Patch or Custom Patch?](https://hub.mender.io/t/use-fit-image-with-embedded-device-tree-patch-on-patch-or-custom-patch/8295)
**Author:** [@Spellbind3162](https://hub.mender.io/u/Spellbind3162)\ **Replies:** 6\ **Last updated:** [July 8, 2026, 2:17pm UTC](https://hub.mender.io/t/use-fit-image-with-embedded-device-tree-patch-on-patch-or-custom-patch/8295 "2026-07-08T14:17:19Z")
Hey all, I’m working with the BeagleV-Fire, which in the boot method from Microchip, mainly uses FIT images and boot scripts which have both the kernel and dtb included via configurations. Yocto Wrynose is moving more … --- ## [Apalis iMX8QM Asynchronous SError Kernel Panic because of dm-verity secure boot and mender ota](https://hub.mender.io/t/apalis-imx8qm-asynchronous-serror-kernel-panic-because-of-dm-verity-secure-boot-and-mender-ota/8305)
**Author:** [@rania](https://hub.mender.io/u/rania)\ **Replies:** 2\ **Last updated:** [July 1, 2026, 1:07pm UTC](https://hub.mender.io/t/apalis-imx8qm-asynchronous-serror-kernel-panic-because-of-dm-verity-secure-boot-and-mender-ota/8305 "2026-07-01T13:07:49Z")
Hi everyone, I am running into a wall with a custom Yocto build integrating Mender and Toradex Secure Boot on an Apalis i.MX8QM. The kernel is panicking with an Asynchronous SError Interrupt during boot. Hardware & Sof… --- ## [Mender client cannot update properly and loses connection to local mender server after rebooting](https://hub.mender.io/t/mender-client-cannot-update-properly-and-loses-connection-to-local-mender-server-after-rebooting/8100)
**Author:** [@biancaxyz](https://hub.mender.io/u/biancaxyz)\ **Replies:** 2\ **Last updated:** [November 20, 2025, 1:08pm UTC](https://hub.mender.io/t/mender-client-cannot-update-properly-and-loses-connection-to-local-mender-server-after-rebooting/8100 "2025-11-20T13:08:50Z")
Hi! I’ve a problem with my mender setup. I am using a board with iMX8, with eMMC and I’ve built the image using yocto. here is the mender-set.conf that is used inside the image: Machine and artifact settings MENDER\_A… --- ## [Testing Mender with QEMU ARM64](https://hub.mender.io/t/testing-mender-with-qemu-arm64/8095)
**Author:** [@TheYoctoJester](https://hub.mender.io/u/TheYoctoJester)\ **Replies:** 0\ **Last updated:** [November 14, 2025, 1:55pm UTC](https://hub.mender.io/t/testing-mender-with-qemu-arm64/8095 "2025-11-14T13:55:44Z")
Iterating on Mender integration with physical ARM hardware means dealing with SD cards, serial cables, and recovery mechanisms when something goes wrong. QEMU provides a faster development cycle by running your Mender-en… --- ## [Problem: conflicting requests - nothing provides kernel-devicetree needed by packagegroup](https://hub.mender.io/t/problem-conflicting-requests-nothing-provides-kernel-devicetree-needed-by-packagegroup/8025)
**Author:** [@Stan](https://hub.mender.io/u/Stan)\ **Replies:** 2\ **Last updated:** [September 30, 2025, 8:21am UTC](https://hub.mender.io/t/problem-conflicting-requests-nothing-provides-kernel-devicetree-needed-by-packagegroup/8025 "2025-09-30T08:21:46Z")
Board description Hey, I’m new to Yocto and I’m having a problem with the “mender-full” implementation. Here’s my configuration below, which is my KAS .yml file: header: version: 11 repos: poky: url: "https://git.yocto… --- ## [Raspberry Pi 5 u-boot information isn't displayed on the serial port](https://hub.mender.io/t/raspberry-pi-5-u-boot-information-isnt-displayed-on-the-serial-port/8022)
**Author:** [@xioalei](https://hub.mender.io/u/xioalei)\ **Replies:** 0\ **Last updated:** [September 27, 2025, 6:18pm UTC](https://hub.mender.io/t/raspberry-pi-5-u-boot-information-isnt-displayed-on-the-serial-port/8022 "2025-09-27T18:18:03Z")
I’m using meta-mender-community to build a Raspberry Pi 5, but after booting, I’m finding that u-boot isn’t displayed on the serial port, while the kernel log is. I’m not sure why. Here are my steps: git clone https:… --- ## [Effortless Yocto builds for BeaglePlay with KAS, Mender OTA, and TI/ARM support](https://hub.mender.io/t/effortless-yocto-builds-for-beagleplay-with-kas-mender-ota-and-ti-arm-support/7976)
**Author:** [@jim-wyatt](https://hub.mender.io/u/jim-wyatt)\ **Replies:** 0\ **Last updated:** [August 30, 2025, 2:47pm UTC](https://hub.mender.io/t/effortless-yocto-builds-for-beagleplay-with-kas-mender-ota-and-ti-arm-support/7976 "2025-08-30T14:47:09Z")
Effortless Yocto builds for BeaglePlay with KAS, Mender OTA, and TI/ARM support I worked tirelessly to cut and paste yaml and use CoPilot to generate some documentation. I thought I might share in the hopes it helps some… --- ## [Plans for STM32MP2 support in Yocto](https://hub.mender.io/t/plans-for-stm32mp2-support-in-yocto/7908)
**Author:** [@Alex\_b](https://hub.mender.io/u/Alex_b)\ **Replies:** 1\ **Last updated:** [July 23, 2025, 12:47pm UTC](https://hub.mender.io/t/plans-for-stm32mp2-support-in-yocto/7908 "2025-07-23T12:47:15Z")
Hi everyone, I’m interested in integrating Mender with the STM32MP2 platform. I’m currently using the DK development board from STMicroelectronics. I noticed that there’s already support for STM32MP1, although it’s bas… --- ## [Nezha Allwinner D1](https://hub.mender.io/t/nezha-allwinner-d1/7778)
**Author:** [@TheYoctoJester](https://hub.mender.io/u/TheYoctoJester)\ **Replies:** 0\ **Last updated:** [May 14, 2025, 5:59am UTC](https://hub.mender.io/t/nezha-allwinner-d1/7778 "2025-05-14T05:59:12Z")
Board description Nezha is a AIoT development board customized by AWOL based on Allwinner’s D1-H chip. It is the world’s first mass-produced development board that supports 64bit RISC-V instruction set and Linux system. … --- ## [NXP 8MPLUS-BB evk Yocto Mender.io integration problem](https://hub.mender.io/t/nxp-8mplus-bb-evk-yocto-mender-io-integration-problem/5733)
**Author:** [@dario.costa](https://hub.mender.io/u/dario.costa)\ **Replies:** 2\ **Last updated:** [May 8, 2025, 2:11pm UTC](https://hub.mender.io/t/nxp-8mplus-bb-evk-yocto-mender-io-integration-problem/5733 "2025-05-08T14:11:36Z")
Hi all, I’m trying without success to integrate Mender on this evaluation from NXP. After uncountable tests and bitbakes, I have always the same result: microSD prepared using sdimg file doesn’t boot at all and nothing… --- ## [Intel® NUC](https://hub.mender.io/t/intel-nuc/308)
**Author:** [@MarekBelisko](https://hub.mender.io/u/MarekBelisko)\ **Replies:** 4\ **Last updated:** [April 24, 2025, 2:48pm UTC](https://hub.mender.io/t/intel-nuc/308 "2025-04-24T14:48:36Z")
The official Mender documentation explains how Mender works. This is simply a board-specific complement to the official documentation. Board description The Intel® NUC is a powerful 4x4-inch mini PC with entertainment, … --- ## [Raspberry Pi 5](https://hub.mender.io/t/raspberry-pi-5/6689)
**Author:** [@TheYoctoJester](https://hub.mender.io/u/TheYoctoJester)\ **Replies:** 10\ **Last updated:** [August 13, 2024, 11:03am UTC](https://hub.mender.io/t/raspberry-pi-5/6689 "2024-08-13T11:03:25Z")
Board description The Raspberry Pi 5 Model is a popular single board computer based on Broadcom SoCs. It is the most recent board within the Raspberry Pi family. URL: https://www.raspberrypi.com/products/raspberry-pi… --- ## [Apalis i.mx8 builds but no working OS](https://hub.mender.io/t/apalis-i-mx8-builds-but-no-working-os/7730)
**Author:** [@Muken](https://hub.mender.io/u/Muken)\ **Replies:** 0\ **Last updated:** [April 16, 2025, 12:44pm UTC](https://hub.mender.io/t/apalis-i-mx8-builds-but-no-working-os/7730 "2025-04-16T12:44:10Z")
Issues with meta-mender Integration on Yocto (Toradex Apalis-i.mx8) Hello, I’m trying to add meta-mender to my Yocto project using the Toradex Apalis-i.mx8. Initially, I encountered many issues related to patches faili… --- ## [Raspberry Pi 4 Model B - Yocto 5.0 "scarthgap" and later](https://hub.mender.io/t/raspberry-pi-4-model-b-yocto-5-0-scarthgap-and-later/7024)
**Author:** [@TheYoctoJester](https://hub.mender.io/u/TheYoctoJester)\ **Replies:** 3\ **Last updated:** [February 11, 2025, 12:57pm UTC](https://hub.mender.io/t/raspberry-pi-4-model-b-yocto-5-0-scarthgap-and-later/7024 "2025-02-11T12:57:14Z")
Board description The Raspberry Pi 4 Model B is the probably most popular board of the Raspberry Pi family. URL: https://www.raspberrypi.org/products/raspberry-pi-4-model-b/ Wiki: https://elinux.org/RPi\_Hub Test re… --- ## [AGX orin industrial build issues](https://hub.mender.io/t/agx-orin-industrial-build-issues/7622)
**Author:** [@pauladam316](https://hub.mender.io/u/pauladam316)\ **Replies:** 1\ **Last updated:** [March 12, 2025, 2:18pm UTC](https://hub.mender.io/t/agx-orin-industrial-build-issues/7622 "2025-03-12T14:18:04Z")
Has anyone tried getting mender to work with the industrial variant of the AGX orin devkit? I figured it would work without issue since its nearly identical to the non-industrial AGX-orin devkit, but if I make a build th… --- ## [Variscite DART-6UL](https://hub.mender.io/t/variscite-dart-6ul/483)
**Author:** [@drewmoseley](https://hub.mender.io/u/drewmoseley)\ **Replies:** 15\ **Last updated:** [April 4, 2023, 10:53pm UTC](https://hub.mender.io/t/variscite-dart-6ul/483 "2023-04-04T22:53:34Z")
The official Mender documentation explains how Mender works. This is simply a board-specific complement to the official documentation. Board description Measuring only 50mm x 25mm, the DART-6UL is a highly flexible Syst… --- ## [Jetson Orin NX & Jetpack 5 Integration Issues](https://hub.mender.io/t/jetson-orin-nx-jetpack-5-integration-issues/7488)
**Author:** [@pkgl](https://hub.mender.io/u/pkgl)\ **Replies:** 8\ **Last updated:** [February 3, 2025, 1:02pm UTC](https://hub.mender.io/t/jetson-orin-nx-jetpack-5-integration-issues/7488 "2025-02-03T13:02:06Z")
Board description Custom baseboard supporting NVIDIA Jetson Orin Nano/NX General Currently, I am working on integrating Mender into an existing functional Yocto configuration for a Jetson Orin Nano Board. As we all know… --- ## [Mender with RZ/G2L-Hummingboard](https://hub.mender.io/t/mender-with-rz-g2l-hummingboard/7456)
**Author:** [@tonrigat](https://hub.mender.io/u/tonrigat)\ **Replies:** 1\ **Last updated:** [January 16, 2025, 11:48am UTC](https://hub.mender.io/t/mender-with-rz-g2l-hummingboard/7456 "2025-01-16T11:48:23Z")
Hi, I’m developing a new Mender integration with Yocto for a RZ/G2L SOM with the Solidrun Hummingboard Pro. I’m quite new to this (Yocto and Mender) and I’m having some trouble making it work. I’ve built a functional i… --- ## [Scarthgap uboot Yocto on BBB - artifact boot fails](https://hub.mender.io/t/scarthgap-uboot-yocto-on-bbb-artifact-boot-fails/7436)
**Author:** [@BenH](https://hub.mender.io/u/BenH)\ **Replies:** 7\ **Last updated:** [January 10, 2025, 4:42pm UTC](https://hub.mender.io/t/scarthgap-uboot-yocto-on-bbb-artifact-boot-fails/7436 "2025-01-10T16:42:48Z")
I have built a Yocto Scarthgap u-boot version of the BeagleBoneBlack Mender source. Putting the build on sd-card, the BBB boots OK and appears in Mender UI. I have accepted it. the boot sequence is: U-Boot SPL 2024.01… --- ## [i.MX8M Mini (Nitrogen 8) - Mender and Scarthgap Integration](https://hub.mender.io/t/i-mx8m-mini-nitrogen-8-mender-and-scarthgap-integration/7397)
**Author:** [@JCori](https://hub.mender.io/u/JCori)\ **Replies:** 15\ **Last updated:** [January 6, 2025, 2:26pm UTC](https://hub.mender.io/t/i-mx8m-mini-nitrogen-8-mender-and-scarthgap-integration/7397 "2025-01-06T14:26:39Z")
Hi all, I am currently working on the Nitrogen8M Mini, an i.MX8 based board with Yocto Scarthgap. I have made several test and attempts to integrate Mender with my board, with no luck so far. My image compiles, however… --- ## [Toradex Apalis i.MX8](https://hub.mender.io/t/toradex-apalis-i-mx8/4103)
**Author:** [@drewmoseley](https://hub.mender.io/u/drewmoseley)\ **Replies:** 8\ **Last updated:** [December 23, 2024, 4:09pm UTC](https://hub.mender.io/t/toradex-apalis-i-mx8/4103 "2024-12-23T16:09:27Z")
The official Mender documentation explains how Mender works. This is simply a board-specific complement to the official documentation. Board description The Apalis i.MX8 is a System on Module based on the NXP® i.MX 8 fa… --- ## [Jetson Orin NX and Jetpack 6 Mender & Intergration issues](https://hub.mender.io/t/jetson-orin-nx-and-jetpack-6-mender-intergration-issues/7375)
**Author:** [@Austriker](https://hub.mender.io/u/Austriker)\ **Replies:** 2\ **Last updated:** [December 12, 2024, 3:45pm UTC](https://hub.mender.io/t/jetson-orin-nx-and-jetpack-6-mender-intergration-issues/7375 "2024-12-12T15:45:05Z")
Hi, I am trying to intergrate Mender with a Jetson Orin NX using an NVME. The Yocto branch: scarthgap Jetpack: 6 Carrier Boad: Seeed Studio A603 I have tested the changes made here: Jetpack 6 fixes My local.conf: #… --- ## [NXP i.MX8MPlus Yocto Mender integration fails to boot](https://hub.mender.io/t/nxp-i-mx8mplus-yocto-mender-integration-fails-to-boot/7334)
**Author:** [@pcarmenp1](https://hub.mender.io/u/pcarmenp1)\ **Replies:** 5\ **Last updated:** [December 8, 2024, 5:10pm UTC](https://hub.mender.io/t/nxp-i-mx8mplus-yocto-mender-integration-fails-to-boot/7334 "2024-12-08T17:10:30Z")
Hi everyone, I’m building Yocto project with mender for i.MX8M Plus, using yocto scarthgap lf-6.6.36. I generated a core-image-minimal-imx8mp-lpddr4-evk.wic.zst, but the booting process failes to load with the following… --- ## [Artifact-verify-key.pem missing](https://hub.mender.io/t/artifact-verify-key-pem-missing/6742)
**Author:** [@hesmar](https://hub.mender.io/u/hesmar)\ **Replies:** 5\ **Last updated:** [November 24, 2024, 7:27pm UTC](https://hub.mender.io/t/artifact-verify-key-pem-missing/6742 "2024-11-24T19:27:17Z")
Hi, I wanted to migrate from Mender 3.5 to 4.0 on kirkstone and noticed that the artifact verify key was not installed to /etc/mender. I think the reason is that the file is not assigned to the new mender-update package… [Next page](https://hub.mender.io/c/board-integrations/yocto-project/10.md?page=1)